Installing and configuring your Lenovo Converged System

Use this information to install and configure the Lenovo Converged System. Please note that the latest version of this document is maintained online.

Scenario: Installing the Lenovo Converged System
After you order a Lenovo Converged System, multiple groups ship, install, and configure your system.
Performing tasks associated with the 9363-RC4 rack
You must remove the 9363-RC4 rack outriggers, position the rack, install the system covers, and install the rack stabilizer bracket before you install the system.
Verifying that the Storwize V7000 control enclosure is cabled between racks
If you ordered your Lenovo Converged System with Storwize V7000 storage, make sure that the rack-to-rack SAS cables are connected between the Storwize V7000 control enclosure in rack 1 to the Storwize V7000 expansion enclosure in rack 2.
Connecting power cords
You must connect the power cords to the power source before configuring the system.
Performing a verification check
Check to ensure that all of your hardware components are present and functioning properly.
Completing the installation
Learn more about the tasks you must perform to complete the system installation.