This command displays and manages the list of each Lenovo Flex System chassis that the CMM discovers on the network.
If command syntax is not correctly entered, or if a command fails to run, an error message is returned. See Common errors for a list of error messages that apply to all commands or remotechassis command errors for a list of error messages that are specific to the remotechassis command.
Function | What it does | Command | Target (see paths in Command targets) |
---|---|---|---|
Display complete list | Displays a list of all Lenovo Flex System chassis
that the CMM discovers
on the network. The list includes the following information about
each Lenovo Flex System chassis:
|
remotechassis | Primary CMM:
|
Display list grouped by health status | Displays a list of names for Lenovo Flex System chassis that the CMM discovers on the network. The list is grouped by health status. | remotechassis -health | Primary CMM:
|
Display list filtered by IP address | Displays a list of Lenovo Flex System chassis that
the CMM discovers
on the network, filtered by the specified IP address. The list includes
the following information about each Lenovo Flex System chassis:
|
remotechassis
-ip ip_address where ip_address is an IP address pattern that uses the asterisk (*) as a wildcard (for example; 201.47.123.*). |
Primary CMM:
|
Display list filtered by name | Displays a list of Lenovo Flex System chassis that
the CMM discovers
on the network, filtered by the specified name. The list includes
the following information about each Lenovo Flex System chassis:
|
remotechassis
-name name where name is a name pattern that uses the asterisk (*) as a wildcard (for example; WebServer*). |
Primary CMM:
|
Clear list | Clears the list of Lenovo Flex System chassis that the CMM discovered on the network. | remotechassis -clear | Primary CMM:
|
Example:
remotechassis -name WebServer*
The following example shows the information that is returned from this command:
system:mm[1]> remotechassis -name WebServer* Running chassis discovery... ------------------------------------------------ Name: WebServer001 IP: 145.48.204.212 Status: normal Firmware: BPET25L,CNETMNUS.PKT,01-08-07,37,1 Type: CMM Serial: 0J1M9E585630 FRU: 25R5777 Chassis Serial: 23A2343 Chassis FRU: 25R5780R5780 Chassis MTM: 885222Z Chassis UUID: 4E349451FA8011D9B10C89E0183AD13D ------------------------------------------------ Name: WebServer002 IP: 145.48.204.222 Status: normal Firmware: BPET25L,CNETMNUS.PKT,01-08-07,37,1 Type: CMM Serial: 0J1M9E585656 FRU: 25R5777 Chassis Serial: 23A2356 Chassis FRU: 25R5780R5780 Chassis MTM: 885222Z Chassis UUID: 4E325951FA8011D9B86C89E0183AD02D ------------------------------------------------ system:mm[1]>
remotechassis -name SYSTEM*
The following example shows the information that is returned from this command:
system:mm[1]> remotechassis -name SYSTEM* Running chassis discovery... ------------------------------------------------ Name: SYSTEM IP: 10.13.1.190 IPv6: 2002:1013::211:25ff:fec3:227c 2001:1013::211:25ff:fec3:227c 2000:1013::211:25ff:fec3:227c fe80::211:25ff:fec3:227c 2000:1013::a1be:a348:7672:2def 2000:1013::1:191 Status: critical Firmware: BPET002,CNETMNUS.PKT,02-17-10,1 Type: CMM Serial: YK118165A117 FRU: 39Y9661 Chassis Serial: KQWPLB9 Chassis FRU: 44X2302 Chassis MTM: 8852HC1 Chassis UUID: E13112E1829448E29999DA2066681D89 ------------------------------------------------ Name: SYSTEM IP: 10.13.1.30 IPv6: 2000:1013::fc58:325c:c8b4:9c4c 2000:1013::214:5eff:fed0:2e1c 2000:1013::1:30 fe80::5652:ff:fe69:d763 2002:1013::211:25ff:fec3:8cfa 2001:1013::211:25ff:fec3:8cfa 2000:1013::211:25ff:fec3:8cfa fe80::211:25ff:fec3:8cfa Status: attention Firmware: BPET54A,CNETMNUS.PKT,02-17-10,84 Type: CMM-telco Serial: YK118269Y115 FRU: 39Y9661 Chassis Serial: 23A0052 Chassis FRU: 42C3673 Chassis MTM: 87501RZ Chassis UUID: B5BAEC01A10B11DB9F3BC1BE8FFF3B3C ------------------------------------------------ system:mm[1]>