fruactlog command

This command displays a summary of the hardware activity for modules installed in the Lenovo Flex System chassis.

If command syntax is not correctly entered, or if a command fails to run, an error message is returned. See Common errors for a list of error messages that apply to all commands or fruactlog command errors for a list of error messages that are specific to the fruactlog command.

Table 1. fruactlog command.

The command table is a multi-row, four-column table where each row describes a CMM CLI command option: column one lists command function, column two provides a detailed command description, column three shows command-option syntax, and column four lists valid command targets.
Function What it does Command Target (see paths in Command targets)
Display chassis activity summary Displays a list of hardware activity for chassis modules, along with their VPD information. fruactlog
Lenovo Flex System chassis:
  • system
Example: To view the list of chassis module activity and VPD information, while the Lenovo Flex System chassis is set as the default command target, at the system> prompt, type 
fruactlog

The following example shows the information that is returned from this command. Only partial results are shown, since the full results returned when running this command on a functional chassis are lengthily.

system> fruactlog

Component: system:bladeenclosure[7]:blade[2]
Name: PRODUCT DESCRIPTION STORAGE ITE
Part Number: 90Y7692
Serial Number: YM11BG22H01X
Manufacturer ID: Lenovo
Time/Date: 09/28/12, 16:24:00
Action: Inserted

Component: system:switch[2]
Name: EN4093 10Gb Ethernet Switch
Part Number: 49Y4273
Serial Number: Y250VT16Y258
Manufacturer ID: Lenovo
Time/Date: 09/25/12, 13:59:37
Action: Inserted

Component: system:power[1]
Name: Power Supply
Part Number: 69Y5806
Serial Number: ZK128116T034
Manufacturer ID: Lenovo
Time/Date: 09/25/12, 13:59:07
Action: Inserted

.
.
.

system>
Parent topic: Command reference