The following messages can result when you run the DSA Intel network test.
-
406-000-000
:
IANet:Registers Test Passed
The test passed.
- Recoverable
- No
- Severity
- Event
- Serviceable
- No
- Automatically notify support
- No
- Related links
-
406-001-000
:
IANet:EEPROM Test Passed
The test passed.
- Recoverable
- No
- Severity
- Event
- Serviceable
- No
- Automatically notify support
- No
- Related links
-
406-002-000
:
IANet:FIFO Test Passed
The test passed.
- Recoverable
- No
- Severity
- Event
- Serviceable
- No
- Automatically notify support
- No
- Related links
-
406-003-000
:
IANet:Interrupts Test Passed
The test passed.
- Recoverable
- No
- Severity
- Event
- Serviceable
- No
- Automatically notify support
- No
- Related links
-
406-004-000
:
IANet:Loopback Test Passed
The test passed.
- Recoverable
- No
- Severity
- Event
- Serviceable
- No
- Automatically notify support
- No
- Related links
-
406-800-000
:
IANet:Registers Test Aborted
Registers test was canceled.
- Recoverable
- No
- Severity
- Warning
- Serviceable
- No
- Automatically notify support
- No
- Related links
-
406-801-000
:
IANet:EEPROM Test Aborted
EEPROM test was canceled.
- Recoverable
- No
- Severity
- Warning
- Serviceable
- No
- Automatically notify support
- No
- Related links
-
406-802-000
:
IANet:FIFO Test Aborted
FIFO test was canceled.
- Recoverable
- No
- Severity
- Warning
- Serviceable
- No
- Automatically notify support
- No
- Related links
-
406-803-000
:
IANet:Interrupts Test Aborted
Interrupt test was canceled.
- Recoverable
- No
- Severity
- Warning
- Serviceable
- No
- Automatically notify support
- No
- Related links
-
406-804-000
:
IANet:Loopback Test Aborted
Loopback test was canceled.
- Recoverable
- No
- Severity
- Warning
- Serviceable
- No
- Automatically notify support
- No
- Related links
-
406-900-000
:
IANet:Registers Test Failed
A failure was detected during the Registers test.
- Recoverable
- No
- Severity
- Error
- Serviceable
- Yes
- Automatically notify support
- No
- User Response
- Complete the following steps:
- Check component firmware level and upgrade if necessary. The installed firmware level can be found in the DSA Diagnostic Event Log within the Firmware/VPD section for this component.
- Rerun the test.
- If failure remains, refer to "Troubleshooting by symptom" in the system "Installation and Service Guide" for the next corrective action.
- Related links
-
406-901-000
:
IANet:EEPROM Test Failed
A failure was detected during the EEPROM test.
- Recoverable
- No
- Severity
- Error
- Serviceable
- Yes
- Automatically notify support
- No
- User Response
- Complete the following steps:
- Check component firmware level and upgrade if necessary. The installed firmware level can be found in the DSA Diagnostic Event Log within the Firmware/VPD section for this component.
- Rerun the test.
- If failure remains, refer to "Troubleshooting by symptom" in the system "Installation and Service Guide" for the next corrective action.
- Related links
-
406-902-000
:
IANet:FIFO Test Failed
A failure was detected during the FIFO test.
- Recoverable
- No
- Severity
- Error
- Serviceable
- Yes
- Automatically notify support
- No
- User Response
- Complete the following steps:
- Check component firmware level and upgrade if necessary. The installed firmware level can be found in the DSA Diagnostic Event Log within the Firmware/VPD section for this component.
- Rerun the test.
- If failure remains, refer to "Troubleshooting by symptom" in the system "Installation and Service Guide" for the next corrective action.
- Related links
-
406-903-000
:
IANet:Interrupts Test Failed
A failure was detected during the Interrupt test.
- Recoverable
- No
- Severity
- Error
- Serviceable
- Yes
- Automatically notify support
- No
- User Response
- Complete the following steps:
- Check component firmware level and upgrade if necessary. The installed firmware level can be found in the DSA Diagnostic Event Log within the Firmware/VPD section for this component.
- Rerun the test.
- Check interrupt assignments in the PCI Hardware section of the DSA Diagnostic Log. If the ethernet device is sharing interrupts, if possible modify the interrupt assignments using F1 Setup to assign a unique interrupt to the device.
- Rerun the test.
- If failure remains, refer to "Troubleshooting by symptom" in the system "Installation and Service Guide" for the next corrective action.
- Related links
-
406-904-000
:
IANet:Loopback Test Failed
A failure was detected during the Loopback test.
- Recoverable
- No
- Severity
- Error
- Serviceable
- Yes
- Automatically notify support
- No
- User Response
- Complete the following steps:
- Check the Ethernet cable for damage and ensure correct cable type and attachment.
- Check component firmware level and upgrade if necessary. The installed firmware level can be found in the DSA Diagnostic Event Log within the Firmware/VPD section for this component.
- Rerun the test.
- If failure remains, refer to "Troubleshooting by symptom" in the system "Installation and Service Guide" for the next corrective action.
- Related links