Removing the USB flash drive- IBM Flex System x240 Compute Node Types 7863, 8737, 8738, and 8956

Use this information to remove the USB flash drive.

Before you begin

Before you remove the USB flash drive, complete the following steps:

Read Safety and Installation guidelines.
If the compute node is installed in a chassis, remove it (see Removing a compute node from a chassis for instructions).
Carefully lay the compute node on a flat, static-protective surface, orienting the compute node with the bezel pointing toward you.

Procedure

To remove the USB flash drive, complete the following steps.

Graphic illustrating the removal of the USB flash drive

Remove the cover (see Removing the compute node cover).
Press the USB enablement kit to access the USB flash drive connectors.
Pull the USB flash drive out of the connector.

What to do next

If you are instructed to return the USB flash drive, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.