Use this information to remove the front handle.
Before you begin
Before you remove
the front handle, complete the following
steps:
- Read Safety and Installation guidelines.
- If the compute
node is installed in a chassis, remove it (see Removing a compute node from a chassis for instructions).
- Carefully lay the compute node on a flat, static-protective surface
with the cover side down, orienting the compute node with the bezel
pointing toward you.
Procedure
To remove the front handle, complete the following
steps.
-
Locate the screw that attaches the handle to the compute
node.
-
Using a T15 Torx screwdriver, remove the screw
from the front handle and save the screw in a safe place. Use the
same screw when you install a front handle.
What to do next
If you are instructed to
return the front handle, follow
all packaging instructions, and use any packaging materials for shipping
that are supplied to you.
