Use this information to remove the light path
diagnostics
panel.
Before you begin
Before you remove
the light path diagnostics panel, complete
the following steps:
- Read Safety and Installation guidelines.
- If the compute
node is installed in a chassis, remove it (see Removing a compute node from a chassis for instructions).
- Carefully lay the compute node on a flat, static-protective surface,
orienting the compute node with the bezel pointing toward you.
Procedure
To remove the light path diagnostics panel, complete
the following steps.
-
Remove the cover (see Removing the compute node cover).
-
Pull the light path diagnostics panel out of the bracket.
-
Disconnect the cable from the system board.
-
Lift the light path diagnostics panel from the compute
node.
What to do next
If you are instructed to
return the light path diagnostics
panel, follow all packaging instructions, and use any packaging materials
for shipping that are supplied to you.
