UEFI diagnostic codes can be generated when the compute
node starts up or while the compute node is running. UEFI diagnostic
codes are logged in the IMM event log in the compute node.
I.11002
[I.11002] A processor mismatch has been detected between one or more processors in the system.
I.18005
[I.18005] A discrepancy has been detected in the number of cores reported by one or more processor packages within the system.
I.18006
[I.18006] A mismatch between the maximum allowed QPI link speed has been detected for one or more processor packages.
I.18007
[I.18007] A power segment mismatch has been detected for one or more processor packages.
I.18008
[I.18008] Currently, there is no additional information for this event.
I.18009
[I.18009] A core speed mismatch has been detected for one or more processor packages.
I.1800A
[I.1800A] A mismatch has been detected between the speed at which a QPI link has trained between two or more processor packages.
I.1800B
[I.1800B] A cache size mismatch has been detected for one or more processor packages.
I.1800C
[I.1800C] A cache type mismatch has been detected for one or more processor packages.
I.1800D
[I.1800D] A cache associativity mismatch has been detected for one or more processor packages.
I.1800E
[I.1800E] A processor model mismatch has been detected for one or more processor packages.
I.1800F
[I.1800F] A processor family mismatch has been detected for one or more processor packages.
I.18010
[I.18010] A processor stepping mismatch has been detected for one or more processor packages.
I.2018002
[I.2018002] The device found at Bus % Device % Function % could not be configured due to resource constraints. The Vendor ID for the device is % and the Device ID is %.
I.2018003
[I.2018003] A bad option ROM checksum was detected for the device found at Bus % Device % Function %. The Vendor ID for the device is % and the Device ID is %.
I.3048005
[I.3048005] UEFI has booted from the backup flash bank.
I.3808004
[I.3808004] The IMM System Event log (SEL) is full.
I.3818001
[I.3818001] The firmware image capsule signature for the currently booted flash bank is invalid.
I.3818002
[I.3818002] The firmware image capsule signature for the non-booted flash bank is invalid.
I.3818003
[I.3818003] The CRTM flash driver could not lock the secure flash region.
I.3868000
[I.3868000] BOFM: System reset performed to reset adapters.
I.3868003
[I.3868003] BOFM: Configuration to large for compatibility mode.
S.3030007
[S.3030007] A firmware fault has been detected in the UEFI image.
S.3040007
[S.3040007] A firmware fault has been detected in the UEFI image.
S.3050007
[S.3050007] A firmware fault has been detected in the UEFI image.
S.3058004
[S.3058004] A Three Strike boot failure has occurred. The system has booted with default UEFI settings.
S.3060007
[S.3060007] A firmware fault has been detected in the UEFI image.
S.3070007
[S.3070007] A firmware fault has been detected in the UEFI image.
S.3108007
[S.3108007 ] The default system settings have been restored.
S.3818004
[S.3818004] The CRTM flash driver could not successfully flash the staging area. A failure occurred.
S.3818007
[S.3818007] The firmware image capsules for both flash banks could not be verified.
S.51003
[S.51003] An uncorrectable memory error was detected in DIMM slot % on rank %.
S.51006
[S.51006] A memory mismatch has been detected. Please verify that the memory configuration is valid.
S.51009
[S.51009] No system memory has been detected.
S.58008
[S.58008] A DIMM has failed the POST memory test.
S.68005
[S.68005] An error has been detected by the the IIO core logic on Bus %. The Global Fatal Error Status register contains %. The Global Non-Fatal Error Status register contains %. Please check error logs for the presence of additional downstream device error data.
S.680B8
[S.680B8] Internal QPI Link Failure Detected.
S.680B9
[S.680B9] External QPI Link Failure Detected.
W.11004
[W.11004] A processor within the system has failed the BIST.
W.3048006
[W.3048006] UEFI has booted from the backup flash bank due to an Automatic Boot Recovery (ABR) event.
W.305000A
[W.305000A] An invalid date and time have been detected.
W.3058009
[W.3058009] DRIVER HEALTH PROTOCOL: Missing Configuraiton. Requires Change Settings From F1.
W.305800A
[W.305800A] DRIVER HEALTH PROTOCOL: Reports 'Failed' Status Controller.
W.305800B
[W.305800B] DRIVER HEALTH PROTOCOL: Reports 'Reboot' Required Controller.
W.305800C
[W.305800C] DRIVER HEALTH PROTOCOL: Reports 'System Shutdown' Required Controller.
W.305800D
[W.305800D] DRIVER HEALTH PROTOCOL: Disconnect Controller Failed. Requires 'Reboot'.
W.305800E
[W.305800E] DRIVER HEALTH PROTOCOL: Reports Invalid Health Status Driver.
W.3808000
[W.3808000] An IMM communication failure has occurred.
W.3808002
[W.3808002] An error occurred while saving UEFI settings to the IMM.
W.3808003
.[W.3808003] Unable to retrieve the system configuration from the IMM.
W.3818005
[W.3818005] The CRTM flash driver could not successfully flash the staging area. The update was aborted
W.3868002
[W.3868002] BOFM: Error communicating with the IMM - BOFM may not be deployed correctly.
W.3938002
[W.3938002] A boot configuration error has been detected.
W.50001
[W.50001] A DIMM has been disabled due to an error detected during POST.
W.58001
[W.58001] The PFA Threshold limit (correctable error logging limit) has been exceeded on DIMM number % at address %. MC5 Status contains % and MC5 Misc contains %.