Use this information to understand the diagnostic text
messages that are displayed while the tests are running.
A diagnostic text message contains one of the following
results:
-
Passed: The test was completed without any errors.
-
Failed: The test detected an error.
-
User Aborted: You stopped the test before it was completed.
-
Not Applicable: You attempted to test a device that is
not present in the compute node.
-
Aborted: The test could not proceed because of the compute
node configuration.
-
Warning: The test could not be run. There was no failure
of the hardware that was being tested, but there might be a hardware
failure elsewhere, or another problem prevented the test from running;
for example, there might be a configuration problem, or the hardware
might be missing or is not being recognized.
The result is followed by an error code or other additional
information about the error.