An Over-Temperature Condition has been detected on the memory device 5 in Group 1 on
Subsystem System Memory.
Explanation
An overtemperature condition has been detected in the DIMM in
DIMM connector 5.
May also be shown as
806f0a0c20050105 or 0x806f0a0c20050105
Severity
Error
Alert Category
Critical - Temperature
Serviceable
Yes
CIM Information
Prefix: PLAT and ID:
0146
SNMP Trap ID
0
Automatically notify Support
No
User response
Complete the following steps until the problem is solved:
- Check the Chassis Management Module or Flex System Manager event log
for any fan- or cooling-related issues.
- Make sure that the airflow at the front and rear of the chassis is not
obstructed and that fillers are in place and correctly installed.
- Make sure that the room temperature is within operating specifications.
- Make sure that the DIMM baffles are in place.
- If the problem remains and no other DIMMs have the same indication,
replace the DIMM.