Use these instructions to replace a 4-bay storage enclosure
in the Flex System Enterprise
Chassis.
You can replace a storage enclosure while the chassis is powered on.
Use this procedure to replace a 4-bay storage enclosure
with the same type of storage enclosure in the same node bays. If
you are installing a new storage enclosure, see Installing a 4-bay storage enclosure for more information.
Follow the detailed instructions that come with the 4-bay
storage enclosure to install, cable, and configure the replacement
storage enclosure.
After you replace the storage enclosure, complete the following
steps:
- Make a note of the storage enclosure identification information
on the labels that come with the Flex System Enterprise
Chassis.
Place a label on the enclosure label tab and on the adjacent chassis
label plate, to the left of the storage enclosure. See User labels for more information.
Important: Do not place the label on the storage enclosure or
in any way block the ventilation holes on the chassis.