Follow the instructions in this section to establish an
Ethernet connection to the Chassis Management Module and
use the CMM web
interface to configure the chassis.
Note:
- You must use the Chassis Management Module to
establish user accounts and to configure IP addresses for the CMM and
the I/O modules before you power-on the Flex System Manager management
node, if one is installed.
- If you have multiple chassis on the management network, you must
establish user accounts and configure the IP addresses for each chassis
before you power-on the Flex System Manager management
node, if one is installed.
- If the chassis does not have an Flex System Manager management
node, use the Chassis Management Module web
interface to complete the chassis configuration.
For more information about using the Chassis Management Module web
interface to configure the chassis, see Lenovo Flex System
Chassis Management Module Chassis
management options.