Information that you need to initially connect to the CMM is on the network access tag.
Important: Remove the network
access tag from the CMM,
before you install the CMM in
a Flex System chassis.
The network access tag lists the following initial connection information for the CMM:
- MAC address
- Default host name
- IPv6 link local address (LLA)
- Default URL (IPv4 static IP address): 192.168.70.100
- Default user name (USERID)
- Default password (PASSW0RD, note the number zero, not the letter O, in PASSW0RD
The network access tag is attached to the front of the CMM, as shown in the following illustration.
Note: If DHCP
connection (default setting) fails, connection is attempted using
the IPv4 static IP address.
The front of the network access tag lists the CMM MAC address, default host name, and IPv6 link local address (LLA), as shown in the following illustration.
The rear of the of the network access tag lists the CMM default URL (IPv4 static IP address), default user name, and default password, as shown in the following illustration.
