0EA0D001 : I/O module [arg1] POST timeout.

The specified I/O module is taking too long to complete the power-on self-test (POST).

Severity

Warning

Alert Category

I/O Modules (Warning)

Log Source

IOMod_01

Serviceable

Yes

Recoverable

Yes

Chassis LED that is Lit

Chassis Check Log

CIM Information

Prefix:CMM

and ID:0063

SNMP Trap ID

mmTrapION

Automatically Notify Support

No

User Response

The I/O module might still be in the process of starting. Therefore, if no recovery message is displayed within 15 minutes, complete the following steps until the problem is solved:

1. Attempt to restart the I/O module, and specify the extended POST process to receive a more specific error code.
2. Perform a service-level reset of the I/O module, which restarts the I/O module.
3. Reinstall the same level of firmware.
4. Replace the I/O module.