.[W.3808003] Unable to retrieve the system configuration from the IMM.
Explanation
Error Retrieving System Configuration from IMM
Severity
Warning
User response
Complete the following steps:
- Use the Setup Utility to verify and save the settings (which will recover the settings).
- Reset the IMM from the CMM.
- Use CMM to remove auxilliary power from the compute node. This will reboot the compute node.
- Check the IBM support site for an applicable service bulletin or firmware update that applies to this error.
- Update the IMM Firmware.
- Remove and re-install CMOS battery for 30 seconds to clear CMOS contents.
- Replace the system board.