The connector [PhysicalConnectorElementName] has encountered a configuration error.
Explanation
The SAS cable connections between the SAS backplane 1 and the system board are not complete.
May also be shown as
806f011b1f03ffff or 0x806f011b1f03ffff
Severity
Error
Alert Category
Critical - Other
Serviceable
Yes
CIM Information
Prefix: PLAT and ID:
0266
SNMP Trap ID
50
Automatically notify Support
Yes
User response
- Check the connections of the SAS cable between the disk and the backplane
- (Trained service personnel only).