Use the information in this section to troubleshoot multiple
compute nodes that does not power on.
Complete the following steps until the problem is solved.
- If you recently installed, moved, or serviced the computer nodes,
reseat the compute nodes in the bays. If the compute nodes were not
recently installed, moved, or serviced, perform a virtual reseat through
the CMM service command. For more information about the CMM service command,
see the "Flex System Chassis Management Module: Command-Line
Interface Reference Guide".
- Check the event logs for any events that are related to the compute
nodes, and solve them. If a Flex System Manager management
node is installed, check the event log on the management node. Otherwise,
check the event log on the Chassis Management Module.