If you omit any optional parameter, the default
value is used. If one or more default values are used and the ASU
cannot access the IMM2 of the upper or lower compute node by using
the LAN over USB access method, the ASU automatically uses the KCS
access method.
To update the UUID, in the ASU command-line interface,
enter the following command:
asu set SYSTEM_PROD_DATA.SysInfoUUID uuid [--host ipaddress] [--user userid][--password password]
where:
- uuid
- is the user-assigned hexadecimal value, up to 16 bytes, that identifies
the compute node.
- ipaddress
- is the internal LAN/USB IP address of the IMM2. The default is
169.254.95.118.
- userid
- is the IMM2 account name (1 of 12 accounts). The default is USERID.
- password
- is the IMM2 account password (1 of 12 accounts). The default is
PASSW0RD (with a zero, not the letter O).
To update the DMI/SMBIOS data, complete the following
steps:
- In the ASU command-line interface, enter the following
command:
asu set SYSTEM_PROD_DATA.SysInfoProdName xxxxyyy [--host ipaddress] [--user userid][--password password]
Important: The default machine type and model number
in the system-board firmware might not be the machine type and model
number of the compute node. Make sure that you enter the correct machine
type and model number.
where:
- xxxx
- is the 4-digit machine type of the compute node.
- yyy
- is the 3-digit model number of the compute node.
- ipaddress
- is the internal LAN/USB IP address of the IMM2. The default is
169.254.95.118.
- userid
- is the IMM2 account name (1 of 12 accounts). The default is USERID.
- password
- is the IMM2 account password (1 of 12 accounts). The default is
PASSW0RD (with a zero, not the letter O).
- Enter the following command:
asu set SYSTEM_PROD_DATA.SysInfoSerialNum zzzzzzz [--host ipaddress] [--user userid][--password password]
where zzzzzzz is
the 7-character serial number of the compute node.
- Enter the following command:
asu set SYSTEM_PROD_DATA.SysEncloseAssetTag aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa [--host ipaddress] [--user userid][--password password]
where aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa is
the 33-character asset tag number of the compute node.