Use this information to remove the USB flash drive.
Before you remove the USB flash drive, complete the following
steps:
- Read Safety and Installation guidelines.
- If the compute node is installed in an Flex System chassis, remove it (see Removing a compute node from a chassis for instructions).
- Carefully lay the compute node on a flat, static-protective surface, orienting the compute node with the bezel pointing toward you.
To remove the USB flash drive, complete the following steps.
- Remove the cover (see Removing the compute node cover).
- Locate the USB connector on the system board (see System-board connectors).
- Pull the USB flash drive out of the connector.
If you are instructed to return the USB flash drive, follow
all packaging instructions, and use any packaging materials for shipping
that are supplied to you.