Sensor PEN LPR Empty has transitioned to critical from a less severe state.
Alert Category
Critical - Other
CIM Information
Prefix:PLAT
and ID:0522
Automatically Notify Support
No
User Response
If the Low Profile Riser (LPR) is not installed in the PCIe Expansion Node (PEN), then the LPR needs to be installed in the PEN to remove this alert and allow the system to power on.
If the LPR is installed, then remove the Compute Node and PEN from the chassis, and remove the LPR. Reinstall the LPR in the base planar in the PEN, and verify if this alert has been cleared.
If this alert continues to occur, then replace the LPR. If after replacing the LPR, the alert continues to occur, then replace the base planar on the PEN.