Installing the bezel - Flex System x280 X6, x480 X6, and x880 X6 Compute Node Types 7903 and 4259

Use this information to install the bezel.

Before you begin

Before you install the bezel, read Safety and Installation guidelines.

To install the bezel, complete the following steps.

Position the bezel on the front of the compute node. Make sure that the clips on the back of the bezel are inserted into the pins on the front of the drive tray.
Press the bezel securely against the chassis. Make sure that the bezel is pressed flat against the chassis around the power button, to maintain access to the power button.