Installation guidelines - Lenovo Flex System x280 X6, x480 X6, and x880 X6 Compute Node Types 7196 and 4258

Before you remove or replace a FRU or install an optional device, read the following information:

Before you begin, read Safety and Handling static-sensitive devices. This information will help you work safely.
When you install your new compute node, take the opportunity to download and apply the most recent firmware updates. This step will help to ensure that any known issues are addressed and that your compute node is ready to function at maximum levels of performance.
To download the latest firmware and device drivers, go to the Fix Central website and enter the compute node machine type in the Product selector field.
Observe good housekeeping in the area where you are working. Place removed covers and other parts in a safe place.
Back up all important data before you make changes to hard disk drives.
Before you remove a compute node from the Lenovo Flex System chassis, you must shut down the operating system and turn off the compute node. You do not have to shut down the chassis itself.
Blue on a component indicates touch points, where you can grip the component to remove it from or install it in the compute node, open or close a latch, and so on.
For a list of supported optional devices for the compute node, see the Lenovo ServerProven website.
If a ServeRAID controller is installed in the compute node, you might find it necessary to remove some parts that came with the kit to access compute node components. For ServeRAID controller parts removal and installation instructions, see the Optional devices information page.