Use this information to remove the front handle.
Before you remove the front handles, complete the following
steps:
- Read Safety and Installation guidelines.
- If the compute node is installed in a Flex System chassis, remove it (see Removing a compute node from a chassis for instructions).
- Carefully lay the compute node on a flat, static-protective surface with the cover side down, orienting the compute node with the bezel pointing toward you.
To remove the front handles, complete the following
steps.
- Locate the screws that attach the handles to the compute node.
- Using a T8 Torx screwdriver, remove the screw from each front handle and save the screw in a safe place. Use the same screws when you install the front handles.
If you are instructed to return the front handles, follow
all packaging instructions, and use any packaging materials for shipping
that are supplied to you.