If you omit any optional parameter, the default value is
used. If one or more default values are used and the ASU cannot access
the IMM2 by using the LAN over USB access method, the ASU automatically
uses the KCS access method.
To update the UUID, in the ASU command-line interface,
enter the following command:
asu set SYSTEM_PROD_DATA.SysInfoUUID uuid [--user userid][--password password]
where:
- uuid
- is the user-assigned hexadecimal
value, up to 16 bytes, that identifies the compute node.
- userid
- is the IMM2 account name (1 of
12 accounts). The default is USERID.
- password
- is the IMM2 account password
(1 of 12 accounts). The default is PASSW0RD (with a zero, not the
letter O).
To update the DMI/SMBIOS data, complete the following steps:
- In the ASU command-line interface, enter the following
command:
asu set SYSTEM_PROD_DATA.SysInfoProdName xxxxyyy [--host ipaddress] [--user userid][--password password]
where:
- xxxx
- is the 4-digit machine type of the
compute node.
- yyy
- is the 3-digit model number of the
compute node.
- ipaddress
- is the internal LAN/USB IP address
of the IMM2. The default is 169.254.95.118.
- userid
- is the IMM2 account name (1 of
12 accounts). The default is USERID.
- password
- is the IMM2 account password
(1 of 12 accounts). The default is PASSW0RD (with a zero, not the
letter O).
- Enter the following command:
asu set SYSTEM_PROD_DATA.SysInfoSerialNum zzzzzzz [--host ipaddress] [--user userid][--password password]
where zzzzzzz is
the 7-character serial number of the compute node.
- Enter the following command:
asu set SYSTEM_PROD_DATA.SysEncloseAssetTag aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa [--host ipaddress] [--user userid][--password password]
where aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa is
the 33-character asset tag number of the compute node.
- Restart the IMM.
- Restart the server.