Use this information to remove the front handle.
Before you remove the front handle, complete the following
steps:
- Read Safety and Installation guidelines.
- If the compute node is installed in a chassis, remove it (see Removing a compute node from a chassis for instructions).
- Carefully lay the compute node on a flat, static-protective surface with the cover side down, orienting the compute node with the bezel pointing toward you.
To remove the front handle, complete the following
steps.
- Locate the screw that attaches the handle to the compute node.
- Using a T15 Torx screwdriver, remove the screw from the front handle and save the screw in a safe place. Use the same screw when you install a front handle.
If you are instructed to return the front handle, follow
all packaging instructions, and use any packaging materials for shipping
that are supplied to you.