Installing the bezel

Use this information to install the bezel.

To install the bezel, complete the following steps.

1. Position the bezel on the front of the compute node.
2. Press the bezel securely against the chassis.
   Note: Make sure that the bezel is pressed flat against the chassis around the power button, to maintain access to the power button.
3. If you are replacing the bezel, install the ID label plate that has machine type and serial number information that you removed from the bezel you are replacing:
   1. If a blank ID label plate is on the new bezel, remove it and discard (see Removing the ID label plate).
   2. Install the ID label plate from the bezel you are replacing on the new front panel (see Installing the ID label plate).
      Note: If your compute node has an RFID tag, it is already attached to the ID label plate.