The CMM event log contains event entries from all of the components in the chassis.
The CMM event log contains a list of all events that are received from all devices in the chassis. These events are also sent by the CMM to the optional Flex System Manager management node, if one is installed. See the CMM event log for a complete list of all non-device-specific events and recommended actions, sorted by event ID. Device-specific event information is in the documentation for the device.
Note: When
managing the Flex System Enterprise
Chassis using
the optional Flex System Manager software,
the CMM event
log settings are not used; however, the Flex System Manager does
not change the CMM event
log settings and the CMM will
continue to function with the current event log settings.
You can configure the destination of event messages on the Event Recipients page. For each event that occurs, a message can be transmitted to an email server, syslog server, or SNMP trap receiver. Multiple recipients can be configured.
Note: When you send CMM event
logs to syslog recipients over a network, the data is sent unencrypted
and can be read by any user who is connected to the network.
Use
the following information to configure event recipient notifications
in the CMM web
interface:
- From the CMM web interface home page, click Events > Event Recipients.
- Click Create and select either Create E-mail Recipient or Create SNMP Recipient, and then enter information as needed and click OK.
Note: If event IDs are not currently displayed
in the Event Log page, you can enable them. To do so, click Filter
Events and select the Event ID check box under Visible
columns.
