This topic lists error messages for the reset command.
See Common errors for a list of error messages that apply to all commands. See reset command for information about command syntax and examples of command use.
| Error message | Definition |
|---|---|
| -exd not supported on switch[bay] where bay identifies the I/O-bay number. |
The user tries to issue a command with the -exd option to an I/O module that does not support it. |
| -full not supported on switch[bay] where bay identifies the I/O-bay number. |
The user tries to issue a command with the -full option to an I/O module that does not support it. |
| -sft not supported on blade[x] | The user tries to issue a command with the -sft option to a compute node that does not support it. |
| -std not supported on switch[bay] where bay identifies the I/O-bay number. |
The user tries to issue a command with the -std option to an I/O module that does not support it. |
| blade[x] must be powered on to issue a soft reset | The user tries to reset a compute node that is powered off. |
| BMC reset not supported. | An error occurs when issuing the reset -T blade[x]:sp command. |
| Disabling failover failed. | An error occurs while the CMM is disabling failover. |
| Enabling failover failed. | An error occurs while the CMM is enabling failover. |
| Error checking standby CMM status. Commands cannot be issued to the standby CMM right now. | A user tries to issue a command to the standby CMM when it is unavailable. |
| Failed to reset the standby CMM | An error occurs when issuing the reset -T mm[p] -standby command. |
| Firmware update is in progress. Try again later. | A user tries to reset the CMM during a firmware update. The error message displays and the CMM does not reset. |
| Power Operations not supported on blade[x] | A user tries to issue the reset -T blade[x] -sft command to a compute node that does not support power operations. |
| Rebooting blade failed. | An error occurs while the CMM is rebooting the compute node. |
| Resetting and running standard/extended/full diagnostics for I/O module failed. | An error occurs while the CMM is resetting and running diagnostics for the I/O module. |
| Resetting blade node_number with NMI not
supported. where the node_number identifies the compute node. |
A user tries to reset a compute node that does not support non-maskable interrupts (NMI). |
| Resetting blade node_number with NMI failed. where the node_number identifies the compute node. |
An error occurs while the CMM is resetting a compute node with NMI. |
| Resetting I/O module failed. | An error occurs while the CMM is resetting the I/O module. |
| Resetting not supported on blade[x] where the x identifies the compute node. |
A user tries to reset a compute node that does not support the reset command. |
| Resetting not supported on switch[x] where the x identifies the I/O module. |
A user tries to reset an I/O module that does not support the reset command. |
| Restarting CMM failed | An error occurs while restarting the CMM. |
| SOL not supported on blade[x] | A user tries to start an SOL session with a compute node that does not support the SOL feature. |
| There is no backup CMM installed. | A user tries to enable failover on a CMM reset and there is no standby CMM. |
| This command cannot be issued right now. If you still want to reset the primary CMM, please use 'reset -o' to override this warning. | A condition exists that is preventing the CMM from resetting. You can either wait and try the command again or force the CMM to reset immediately using the reset -o override option. |
| This command cannot be issued right now. The primary CMM is initializing, and a reset might result in a failover. If you still want to reset the primary CMM, please use 'reset -o' to override this warning. | A condition exists that is preventing the CMM from resetting. You can either wait and try the command again or force the CMM to reset immediately using the reset -o override option. |
| This command cannot be issued right now. The primary CMM is verifying the code level on the standby CMM. Please try again later. | A user tries to reset the primary CMM while it is busy. |
| This command cannot be issued right now. The standby CMM is flashing, and a reset might result in a failover. Please try again later. | A user tries to reset the primary CMM while the standby CMM is unable to support failover. |
| This command cannot be issued right now. The standby CMM is in a post-flash initialization state, and a reset might result in a failover. If you still want to reset the primary CMM, please use 'reset -o' to override this warning. | A user tries to reset the primary CMM while the standby CMM is unable to support failover. |
| This command cannot be issued right now. The standby CMM is in an unknown state, and a reset might result in a failover. If you still want to reset the primary CMM, please use 'reset -o' to override this warning. | A condition exists that is preventing the CMM from resetting. You can either wait and try the command again or force the CMM to reset immediately using the reset -o override option. |
| This command cannot be issued right now. There is no standby CMM present. | A user tries to reset the primary CMM when no standby CMM is available to support failover. |