Flex SystemChassis Management Module command-line interface: coolingzones command errors

This topic lists error messages for the coolingzones command.

See Common errors for a list of error messages that apply to all commands. See coolingzones command for information about command syntax and examples of command use.

Table 1. coolingzones command errors.
The error table is a multi-row, two-column table where each row describes a CMM CLI command error: column one lists the error reported by the command-line interface and column two describes what the error means.
Error message	Definition
Getting max slots of target failed	An error occurs while getting the maximum number of slots in the command target.
Invalid zone option. It must be two alphanumeric characters	The user attempts to issue the command for a cooling zone that is invalid.
Invalid zone option. The first character must be 'z'	The user attempts to issue the command without specifying the letter "z" as the first character of the cooling zone.
The second character must be a digit in range of 1 to max where max defines the highest cooling zone number that is allowed.	The user attempts to issue the command without specifying the a number between 1 and the maximum allowed value, inclusive, as the second character of the cooling zone.
Getting cooling zone information failed	An error occurs while getting cooling zone information.
Getting cooling zones status failed	An error occurs while getting cooling zone status.
No cooling zone information available	An error occurs while getting cooling zone information.