Flex SystemChassis Management Module command-line interface: clear command errors

This topic lists error messages for the clear command.

See Common errors for a list of error messages that apply to all commands. See clear command for information about command syntax and examples of command use.

Table 1. clear command errors.
The error table is a multi-row, two-column table where each row describes a CMM CLI command error: column one lists the error reported by the command-line interface and column two describes what the error means.
Error message	Definition
Disabling failover failed	An error occurs while disabling failover.
Firmware update is in progress. Try again later.	The user tries to reset the CMM to its default configuration during a firmware update. The error message displays and the CMM configuration does not reset.
Internal error resetting to defaults.	An error occurs while the CMM is resetting the CMM to its default configuration. The error message displays and the CMM configuration does not reset.
Not supported by this type of I/O module. Type env -h for help on changing targets	A user tries to run a command option on an I/O module that does not support it.
This command cannot be issued right now. If you still want to clear the primary CMM, please use 'clear -cnfg -o' to override this warning.	A condition exists that is preventing the CMM from being cleared. You can either wait and try the command again or force the CMM to clear immediately using the `clear -cnfg -o` override option.
This command cannot be issued right now. The standby CMM is in an unknown state, and a reset might result in a failover. If you still want to clear the primary CMM, please use 'clear -cnfg -o' to override this warning.	A condition exists that is preventing the CMM from being cleared. You can either wait and try the command again or force the CMM to clear immediately using the `clear -cnfg -o` override option.
This command cannot be issued right now. The primary CMM is verifying the code level on the standby CMM. Please try again later.	A user tries to issue a command to the CMM when it is unavailable.
This command cannot be issued right now. The standby CMM is flashing, and resetting the primary CMM to defaults might result in a failover. Please try again later.	A user tries to reset the primary CMM to defaults while the standby CMM is unable to support failover.
This command cannot be issued right now. The standby CMM is in a post-flash initialization state, and resetting the primary CMM to defaults might result in a failover. If you still want to reset the primary CMM, please use 'clear -cnfg -o' to override this warning.	A user tries to reset the primary CMM to defaults while the standby CMM is unable to support failover.
This command cannot be issued right now. The primary CMM is initializing, and a reset might result in a failover. If you still want to clear the primary CMM, please use 'clear -cnfg -o' to override this warning.	A condition exists that is preventing the CMM from being cleared. You can either wait and try the command again or force the CMM to clear immediately using the `clear -cnfg -o` override option.