Flex SystemChassis Management Module command-line interface: bootmode command errors

This topic lists errors for the bootmode command.

See Common errors for a list of error messages that apply to all commands. See bootmode command for information about command syntax and examples of command use.

Table 1. bootmode command errors.
The error table is a multi-row, two-column table where each row describes a CMM CLI command error: column one lists the error reported by the command-line interface and column two describes what the error means.
Error message	Definition
Boot mode not supported on blade[x] where x is the number of the node bay.	The command is directed to a compute node that does not support the bootmode feature.
Error retrieving the boot mode of this blade.	The CMM is unable read the boot mode of the compute node.
Set the blade bay boot mode to permanent failed where bay is the number of the node bay.	The CMM is unable to set the compute node boot mode to the specified value.
Set the blade bay boot mode to temporary failed where bay is the number of the node bay.	The CMM is unable to set the compute node boot mode to the specified value.