Removing and replacing Tier 1 customer replaceable units (CRUs)
Use this information for removing and replacing Tier 1 CRUs.
About this task
Replacement of Tier 1 CRUs is your responsibility. If IBM® installs a Tier 1 CRU at your request, you will be charged for the installation.
- Removing the adapter-retention assembly
Use this information to remove the adapter-retention assembly. - Installing the adapter-retention assembly
Use this information to install the adapter-retention assembly. - Removing the bezel
Use this information to remove the bezel. - Installing the bezel
Use this information to install the bezel. - Removing the battery
Use this information to remove the battery. - Installing the battery
Use this information to install a battery. - Removing a DIMM
Use this information to remove a dual inline memory module (DIMM). - Installing a DIMM
Use this information to install a DIMM. - Removing a fabric connector
Use this information to remove a fabric interposer connector. - Installing a fabric connector
Use this information to install a fabric connector. - Removing the hot-swap storage backplane
Use this information to remove the hot-swap storage backplane. - Installing the hot-swap storage backplane
Use this information to install the hot-swap storage backplane. - Removing a hot-swap storage drive
Use this information to remove a hot-swap storage drive. - Installing a hot-swap storage drive
Use this information to install a hot-swap storage drive. - Removing an I/O expansion adapter
Use this information to remove an I/O expansion adapter. - Installing an I/O expansion adapter
Use this information to install an I/O expansion adapter. - Removing an Flex System Manager Network Adapter
Use this information to remove an Flex System Manager Network Adapter. - Installing an Flex System Manager Network Adapter
Use this information to install an Flex System Manager Network Adapter. - Removing the light path diagnostics panel
Use this information to remove the light path diagnostics panel. - Installing the light path diagnostics panel
Use this information to install the light path diagnostics panel. - Removing the RFID tag
Use this information to remove the RFID tag from the bezel. - Installing the RFID tag
Use this information to install the RFID tag on the bezel. - Removing a solid state drive
Use this information to remove a solid state drive. - Installing a solid state drive
Use this information to install a solid state drive (SSD). - Removing the solid state drive mounting sleeve
Use this information to remove the solid state drive (SSD) mounting sleeve. - Installing the solid state drive mounting sleeve
Use this information to install the solid state drive (SSD) mounting sleeve.
Parent topic: Installing, removing, and replacing components