Accessing the IMM2 using the LAN over USB interface

Unlike a baseboard management controller, the IMM2 does not require IPMI device drivers or USB daemons for in-band IMM2 communication. Instead, a LAN over USB interface enables in-band communication to the IMM2; the IMM2 hardware on the system board presents an internal Ethernet interface from the IMM2 to the operating system. LAN over USB is also called the USB in-band interface in the IMM2 web interface.

The following table shows the IP addresses for the IMM2 and the host.
Table 1. LAN over USB addresses
IMM2 IP addressIMM2 IP subnet maskHost addressHost subnetHost subnet maskKeyboard Controller Style (KCS) address
169.254.95.118 255.255.255.0 169.254.95.120169.254.95.0/24 255.255.255.0 0x0CC0