Installing the bezel

Use this information to install the bezel.

Before you begin

Before you install the bezel, read Safety and Installation guidelines.

About this task

If the compute node came with a RFID tag attached to the bezel, you must obtain and install a replacement RFID tag.

To obtain a RFID tag, see Parts listing, Types 7863, 8737, 8738, and 8956
For installation instructions, see Installing the RFID tag

Procedure

To install the bezel, complete the following steps.

Graphic illustrating the installation of a SAS hot-swap storage drive

Position the bezel on the front of the compute node.
Press the bezel securely against the chassis.
Note: Make sure that the bezel is pressed flat against the chassis around the power button, to maintain access to the power button.