264-902-000
Tape Test Failed

Explanation

Tape Test Failed. Media is not detected.

Severity

Error

Serviceable

Yes

Recoverable

No

Automatically notify Support

No

User response

Complete the following steps:
  1. Clean the tape drive using the appropriate cleaning media and install new media.
  2. Run the test again.
  3. Make sure that the drive firmware is at the latest level.
  4. Rerun the test after upgrading to the latest firmware level.
  5. If the failure remains, refer to "Troubleshooting by symptom" in the system "Installation and Service Guide" for the next corrective action.

Related Links