Installing the bezel

Use this information to install the bezel.

Before you install the bezel, read Safety and Installation guidelines.

If the compute node came with a RFID tag attached to the bezel, you must obtain and install a replacement RFID tag.

To install the bezel, complete the following steps.


Graphic illustrating the installation of a SAS hot-swap storage drive

  1. Position the bezel on the front of the compute node.
  2. Press the bezel securely against the chassis.
    Note: Make sure that the bezel is pressed flat against the chassis around the power button, to maintain access to the power button.
Parent topic: Removing and replacing Tier 1 customer replaceable units (CRUs)