215-903-000
Optical Drive Test Aborted

Explanation

Optical Drive Test Aborted. Could not access the device.

Severity

Warning

Serviceable

Yes

Recoverable

No

Automatically notify Support

No

User response

Complete the following steps:
  1. Insert a new CD or DVD into the drive and wait for 15 seconds for the media to be recognized. Rerun the test.
  2. Check the drive cabling for loose or broken connections at both ends or damage to the cable. Replace the cable if damage is present.
  3. Run the test again.
  4. Check system firmware level and upgrade if necessary.The installed firmware level can be found in the DSA Diagnostic Event Log within the Firmware/VPD section for this component.
  5. Run the test again.
  6. If failure remains, refer to "Troubleshooting by symptom" in the system "Installation and Service Guide" for the next corrective action.

Related Links