The following messages can result when you run the DSA Emulex adapter test.
-
516-000-000
:
ELXUCNA: NIC MAC LoopBackTest Passed
The test passed.
- Recoverable
- No
- Severity
- Event
- Serviceable
- No
- Automatically notify support
- No
- Related links
-
-
516-001-000
:
ELXUCNA: NIC PHY LoopBackTest Passed
The test passed.
- Recoverable
- No
- Severity
- Event
- Serviceable
- No
- Automatically notify support
- No
- Related links
-
-
516-002-000
:
ELXUCNA: ELXUCNA: NIC LED(Beacon)Test Passed
The test passed.
- Recoverable
- No
- Severity
- Event
- Serviceable
- No
- Automatically notify support
- No
- Related links
-
-
516-800-000
:
ELXUCNA: NIC MAC LoopBackTest Aborted
Loopback testing at the MAC layer was canceled.
- Recoverable
- No
- Severity
- Warning
- Serviceable
- No
- Automatically notify support
- No
- Related links
-
-
516-801-000
:
ELXUCNA: NIC PHY LoopBackTest Aborted
Loopback testing at the physical layer was canceled.
- Recoverable
- No
- Severity
- Warning
- Serviceable
- No
- Automatically notify support
- No
- Related links
-
-
516-802-000
:
ELXUCNA: ELXUCNA: NIC LED(Beacon)Test Aborted
Verification of status LEDs was canceled.
- Recoverable
- No
- Severity
- Warning
- Serviceable
- No
- Automatically notify support
- No
- Related links
-
-
516-900-000
:
ELXUCNA: NIC MAC LoopBackTest Failed
A failure was detected during the loopback test at the MAC layer.
- Recoverable
- No
- Severity
- Error
- Serviceable
- Yes
- Automatically notify support
- No
- User Response
- Complete the following steps:
- Check component firmware level and upgrade if necessary. The installed firmware level can be found in the DSA Diagnostic Event Log within the Firmware/VPD section for this component.
- Rerun the test.
- If failure remains, refer to "Troubleshooting by symptom" in the system "Installation and Service Guide" for the next corrective action.
- Related links
-
-
516-901-000
:
ELXUCNA: NIC PHY LoopBackTest Failed
A failure was detected during the loopback test at the physical layer.
- Recoverable
- No
- Severity
- Error
- Serviceable
- Yes
- Automatically notify support
- No
- User Response
- Complete the following steps:
- Check component firmware level and upgrade if necessary. The installed firmware level can be found in the DSA Diagnostic Event Log within the Firmware/VPD section for this component.
- Rerun the test.
- If failure remains, refer to "Troubleshooting by symptom" in the system "Installation and Service Guide" for the next corrective action.
- Related links
-
-
516-902-000
:
ELXUCNA: ELXUCNA: NIC LED(Beacon)Test Failed
A failure was detected while verifying operation of the status LEDs.
- Recoverable
- No
- Severity
- Error
- Serviceable
- Yes
- Automatically notify support
- No
- User Response
- Complete the following steps:
- Check component firmware level and upgrade if necessary. The installed firmware level can be found in the DSA Diagnostic Event Log within the Firmware/VPD section for this component.
- Rerun the test.
- If failure remains, refer to "Troubleshooting by symptom" in the system "Installation and Service Guide" for the next corrective action.
- Related links
-