Adding or removing a chassis
The Management Domain page in the management software web interface enables you to add and remove an Flex System Enterprise Chassis from a management domain.
Note: This topic describes how to access this
task in the IBM® Flex System
Manager Web user interface. If you are using the IBM FSM
Explorer,
use the finder at the top of the user interface (shown here) to locate
this task: 
To add or remove a chassis from the Chassis Manager view in the
web interface, click the General Actions menu
in the Common Actions area; then, click Add or Remove a
Chassis. The Management Domain page opens, where you can
discover and manage a new chassis or remove an existing chassis.
Note: The
Common Actions area (beside the table or graphical view) is not labeled
unless a managed resource has been selected. The General
Actions menu is displayed regardless of whether a resource
is selected.
Important:
- Before you unmanage a chassis, make sure that you complete the procedures that are described in Unmanaging a chassis. Otherwise, the compute nodes in that chassis will not be removed from the management software.
- If you have to remove a Flex System Manager Types 7955, 8731, and 8734 management node from a chassis, be sure to unmanage the chassis (or remove the chassis) from the management node management domain before you remove the node.